同步操作将从 OpenHarmony/docs 强制同步,此操作会覆盖自 Fork 仓库以来所做的任何修改,且无法恢复!!!
确定后同步将在后台操作,完成时将刷新页面,请耐心等待。
The Display Serial Interface (DSI) is a specification stipulated by the Mobile Industry Processor Interface (MIPI) Alliance, aiming to reduce the cost of display controllers in a mobile device. It defines a serial bus and communication protocol among the host, the source of image data, and the target device. In this way, the DSI can send pixel data or commands to peripherals (usually LCDs or similar display devices) in serial mode, or reads information such as status and pixel from the peripherals.
MIPI DSI is capable of working in both high speed (HS) mode and low power (LP) mode. All data lanes can only travel from the DSI host to a peripheral in HS mode, except the first data lane, which can also receive data such as status information and pixels from the peripheral in LP mode. The clock lane is dedicated to transmitting synchronization clock signals in HS mode.
Figure 1 shows a simplified DSI interface. Conceptually, a DSI-compliant interface has the same features as interfaces complying with DBI-2 and DPI-2 standards. It sends pixels or commands to a peripheral and can read status or pixel information from the peripheral. The main difference is that the DSI serializes all pixel data, commands, and events that, in traditional interfaces, are conveyed to and from the peripheral on a parallel data bus with additional control signals.
Table 1 APIs for MIPI DSI
Receives a DCS command for reading data with the specified length. |
NOTE: All functions described in this document can be called only in kernel space.
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。