1 Star 0 Fork 4.9K

罗小黑 / docs

forked from OpenHarmony / docs 
加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
net_device-h.md 42.21 KB
一键复制 编辑 原始数据 按行查看 历史
wenjun 提交于 2020-09-08 10:08 . add OpenHarmony 1.0 baseline

net_device.h

Overview

Related Modules:

WLAN

Description:

Defines WLAN network device interfaces.

This module provides network device operations for driver development. The operations are as follows: Initializes, adds, obtains, and deletes a network device. Reports network data, informs the network layer of the data link layer status, sets IP addresses, and starts or stops Dynamic Host Configuration Protocol (DHCP).

Since:

1.0

Version:

1.0

Summary

Data Structures

Data Structure Name

Description

EtherHeader

Defines the Ethernet header information of a data frame, including the destination address, source address, and Ethernet type.

IpHeader

Defines the IP header information of a data frame, including the version number, service type, and total length.

UdpHeader

Defines the UDP header information of a data frame, including the source port number and destination port number.

TcpHeader

Defines the TCP header information of a data frame, including the source port number and destination port number.

IpV4Addr

Defines an IPv4 address.

NetDevNotify

Defines a network device notification, including an IP address and the notification type.

IfType

Defines the network port type, for example, the WLAN network port.

IfReq

Defines ioctrl data.

NetDevice

Defines a network device, including the network interface category and name, and network port type.

NetDeviceInterFace

Defines interfaces that need to be implemented externally by network devices, including initializing, opening, and closing a network device.

Macros

Macro Name and Value

Description

MAC_ADDR_SIZE   6

Indicates a 6-byte MAC address.

NET_DEVICE_IFF_RUNNING   IFF_RUNNING

Indicates that the network port is working.

ETHER_TYPE_RARP   0x8035

Indicates Reverse Address Resolution Protocol (RARP).

ETHER_TYPE_PAE   0x888e

Indicates Port Access Entity (PAE).

ETHER_TYPE_IP   0x0800

Indicates Internet Protocol (IP).

ETHER_TYPE_AARP   0x80f3

Indicates AppleTalk Address Resolution Protocol (AARP).

ETHER_TYPE_IPX   0x8137

Indicates Internetwork Packet Exchange (IPX).

ETHER_TYPE_ARP   0x0806

Indicates Address Resolution Protocol (ARP).

ETHER_TYPE_IPV6   0x86dd

Indicates Internet Protocol version 6 (IPv6).

ETHER_TYPE_TDLS   0x890d

Indicates Tunneled Direct Link Setup (TDLS).

ETHER_TYPE_VLAN   0x8100

Indicates Virtual Local Area Network (VLAN).

ETHER_TYPE_WAI   0x88b4

Indicates WLAN Authentication and Privacy Infrastructure (WAPI).

ETHER_LLTD_TYPE   0x88D9

Indicates Link Layer Topology Discovery (LLTD).

ETHER_ONE_X_TYPE   0x888E

Indicates 802.1x network port authentication.

ETHER_TUNNEL_TYPE   0x88bd

Indicates a tunnel protocol.

ETHER_TYPE_PPP_DISC   0x8863

Indicates the point-to-point discovery type.

ETHER_TYPE_PPP_SES   0x8864

Indicates the point-to-point session discovery type.

ETHER_TYPE_6LO   0xa0ed

Indicates IPv6 over Low Power Wireless Personal Area Networks (6LoWPANs).

TCP_PROTOCAL   6

Indicates the Transmission Control Protocol (TCP).

UDP_PROTOCAL   17

Indicates the User Datagram Protocol (UDP).

IP_PRI_SHIFT   5

Indicates the shift in the priority for an IP address.

DHCP_UDP_SRC_PORT   68

Indicates the source port number of DHCP.

DHCP_UDP_DES_PORT   67

Indicates the destination port number of DHCP.

Typedefs

Typedef Name

Description

NetDevice

typedef struct NetDevice 

Defines a network device, including the network interface category and name, and network port type.

Enumerations

Enumeration Name

Description

NetIfCategory { LITE_OS, RICH_OS }

Enumerates network interface categories, including lightweight OS and rich OS.

NetIfStatus { NETIF_DOWN, NETIF_UP }

Enumerates network interface states, including online and offline.

NetIfLinkStatus { NETIF_LINK_DOWN, NETIF_LINK_UP }

Enumerates network link layer states, including online and offline.

NetLinkType { ETHERNET_LINK = 1, WIFI_LINK = 801 }

Enumerates data link types, including Ethernet and WLAN.

ProcessingResult { PROCESSING_CONTINUE, PROCESSING_COMPLETE, PROCESSING_ERROR }

Enumerates data processing results, including continuing processing, processing completed, and error.

NetDevTxResult { NETDEV_TX_OK = 0x00, NETDEV_TX_BUSY = 0x10, NETDEV_TX_LOCKED = 0x20 }

Enumerates data sending results, including sending succeeded, other data being sent at the link layer, and data link layer being locked.

Protocol80211IfType {   PROTOCOL_80211_IFTYPE_UNSPECIFIED, PROTOCOL_80211_IFTYPE_ADHOC, PROTOCOL_80211_IFTYPE_STATION, PROTOCOL_80211_IFTYPE_AP,   PROTOCOL_80211_IFTYPE_AP_VLAN, PROTOCOL_80211_IFTYPE_WDS, PROTOCOL_80211_IFTYPE_MONITOR, PROTOCOL_80211_IFTYPE_MESH_POINT,   PROTOCOL_80211_IFTYPE_P2P_CLIENT, PROTOCOL_80211_IFTYPE_P2P_GO, PROTOCOL_80211_IFTYPE_P2P_DEVICE, PROTOCOL_80211_IFTYPE_NUM,   PROTOCOL_80211_IFTYPE_MAX = PROTOCOL_80211_IFTYPE_NUM - 1 }

Enumerates 802.11 network port types, including AP, STA, and P2P.

NetdeviceError { COMMON_ERROR = 1, ADD_LWIP_ERROR }

Enumerates network device errors, including common errors and errors in adding network devices to LwIP.

Functions

Function Name

Description

NetDeviceInit (const char *ifName, uint32_t len, NetIfCategory ifCategory)

struct NetDevice

Initializes a network device to obtain its instance.

NetDeviceDeInit (struct NetDevice *netDevice)

int32_t 

Deletes a network device.

NetDeviceAdd (struct NetDevice *netDevice, Protocol80211IfType ifType)

int32_t 

Adds a network device to a protocol stack.

NetDeviceDelete (struct NetDevice *netDevice)

int32_t 

Deletes a network device from a protocol stack.

NetDeviceGetInstByName (const char *name)

struct NetDevice

Obtains the initialized network device instance by a specified device name.

NetDeviceIsAnyInstRunning (void)

bool 

Checks whether there are working devices among the added network devices.

NetDeviceIsInstRunning (const struct NetDevice *netDevice)

bool 

Checks whether a specified network device is working.

NetDevGetRegisterCount (void)

uint32_t 

Obtains the number of added network devices.

NetDeviceGetCap (void)

uint32_t 

Obtains the maximum number of network devices that can be registered with this system at the same time.

NetDeviceGetInstByIndex (uint32_t index)

struct NetDevice

Obtains a network device instance based on the index number.

NetIfSetAddr (const struct NetDevice *netDevice, const IpV4Addr *ipAddr, const IpV4Addr *netMask, const IpV4Addr *gw)

int32_t 

Sets an IP address, mask, and gateway.

NetIfSetStatus (const struct NetDevice *netDevice, NetIfStatus status)

int32_t 

Notifies the network layer of the network port state.

NetIfSetLinkStatus (const struct NetDevice *netDevice, NetIfLinkStatus status)

int32_t 

Notifies the network layer of the data link layer status.

NetIfRx (const struct NetDevice *netDevice, struct NetBuf *buff)

int32_t 

Transfers the input data packets from the network side to a protocol stack.

NetIfRxNi (const struct NetDevice *netDevice, struct NetBuf *buff)

int32_t 

Transfers data packets from the network side to a protocol stack in an interrupt processing thread.

NetIfDhcpsStart (const struct NetDevice *netDevice, char *ip, u16_t ipNum)

int32_t 

Starts the DHCP server.

NetIfDhcpsStop (const struct NetDevice *netDevice)

int32_t 

Stops the DHCP server.

NetIfDhcpStart (const struct NetDevice *netDevice)

int32_t 

Starts the DHCP client of a specified network device.

NetIfDhcpStop (const struct NetDevice *netDevice)

int32_t 

Stops the DHCP client of a specified network device.

NetIfDhcpIsBound (const struct NetDevice *netDevice)

int32_t 

Obtains the DHCP negotiation status of a specified network device.

1
https://gitee.com/lawguiren/docs.git
git@gitee.com:lawguiren/docs.git
lawguiren
docs
docs
master

搜索帮助