Prepare v2020.07-rc1

Prepare v2020.04

Prepare v2020.04-rc5

Prepare v2020.04-rc4

• adapt voltage for the LPDDR2 and LPDDR3
• solve tuning and BIST issues
• fix self refresh disable during DQS training
• cosmetics: fix warning when 1.5A power supply is used on DK1/DK2
• dts: stm32mp1: alignment with v4.19-stm32mp-r3.1

Prepare v2020.04-rc3

• Add the tuning informations required by CubeMX v5.6

Prepare v2020.04-rc2

• Add support of STM32MP15x Rev.Z
• Add support of 800 MHz part number (15xD and 15xF)
• Allow PLL1 configuration with OPP
• Increased vdd2_ddr for 32bits LPDDR2/3
• Correct the power-cycle for SDMMC
• Allow all frequency for I2C bus
• Correctly handle resource table and elf header in remote proc
• Support phy-reset-gpios in net driver
• Correct handle reference between video and panel driver
  (avoid crash for NULL ref)
• Device tree alignment with v4.19-stm32mp-r3
• Minor fixes

Prepare v2020.04-rc1

Prepare v2020.01

• Let the red error led ON after blinking
• Device tree alignment with 4.19-stm32mp-r2.4

Prepare v2020.01-rc4

Prepare v2020.01-rc3

Prepare v2020.01-rc2

Prepare v2020.01-rc1

Prepare v2019.10

v2018.11-stm32mp-r3.1

Prepare v2019.10-rc4

• Add SPI driver
• Add RTC driver for UEFI
• Migrate qspi driver to spi-mem framework
• DDR setting v1.45 / alignment with latest CubeMX generation
• Solve issues of ethernet driver and phy
• Activate UEFI support for EBBR (https://github.com/ARM-software/ebbr)
• Update bootcmd and migrate to Kconfig (CONFIG_BOOTCOMMAND)
• Activate U-Boot ENV support in boot device (NOR/NAND/eMMC or SD card)
• Prepare bootcmd for Android
• Alignment for latest kernel device tree v4.19-stm32mp-r2
• Alignment with up-streamed drivers
• Many other corrections