Bill of materials

This page includes an aggregated overview (incl. images) of all the parts needed to build the CNC-machine. To get a better understanding of how the parts are used (additional comments etc), check the following detailed spreadsheet:

• On Google drive
• Bill_of_material.xlsx

The 3d-printed parts were printed in standard PLA using:

• 30% infill
• 4 top solid horizontal layers
• 4 bottom solid horizontal layers
• 4 perimeters

The complete PrusaSlicer config used can be found here: prusa_slicer_config.ini

3d-printed parts

Item No.	Type	Amount	Image	STL-file	OBJ-file
P01	Back middle panel (large electronic box)	1	Missing	middle_back_panel_electronic_box_large.stl	middle_back_panel_electronic_box_large.obj
P02	Back middle panel (small electronic box)	1		middle_back_panel_electronic_box_small.stl	middle_back_panel_electronic_box_small.obj
P03	Back panel (large electronic box)	1		back_panel_electronic_box_large.stl	back_panel_electronic_box_large.obj
P04	Back panel (small electronic box)	1		back_panel_electronic_box_small.stl	back_panel_electronic_box_small.obj
P05	Cable chain mount	1		Y_CHAIN_BOTTOM_BRACKET_SUPPORT_1.stl	Y_CHAIN_BOTTOM_BRACKET_SUPPORT_1.obj
P06	Cable chain support	1		Y_CHAIN_BOTTOM_BRACKET_SUPPORT_2.stl	Y_CHAIN_BOTTOM_BRACKET_SUPPORT_2.obj
P07	Carriage	1		CARRIAGE.stl	CARRIAGE.obj
P08	End-stop mount (ordinary)	3		ENDSTOP_LIMIT_SWITCH.stl	ENDSTOP_LIMIT_SWITCH.obj
P09	End-stop mount (tall)	1		Y_AXIS_ENDSTOP_LIMIT_SWITCH_LONG.stl	Y_AXIS_ENDSTOP_LIMIT_SWITCH_LONG.obj
P10	End-stop mount (thick)	1		X_AXIS_ENDSTOP_LIMIT_SWITCH_THICK.stl	X_AXIS_ENDSTOP_LIMIT_SWITCH_THICK.obj
P11	Flexible conduit strain relief (halves)	8		CABLE_STRAIN_RELIEF.stl	CABLE_STRAIN_RELIEF.obj
P12	Front middle panel (large electronic box)	1		middle_front_panel_electronic_box_large.stl	middle_front_panel_electronic_box_large.obj
P13	Front middle panel (small electronic box)	1		middle_front_panel_electronic_box_small.stl	middle_front_panel_electronic_box_small.obj
P14	Front panel (large electronic box)	1		front_panel_electronic_box_large.stl	front_panel_electronic_box_large.obj
P15	Front panel (small electronic box)	1		front_panel_electronic_box_small.stl	front_panel_electronic_box_small.obj
P16	Idler block	3		IDLER_BLOCK.stl	IDLER_BLOCK.obj
P17	Left belt tension slider	1		Y_AXIS_LEFT_BELT_TENSIONER.stl	Y_AXIS_LEFT_BELT_TENSIONER.obj
P18	Left belt tensioner	1		Y_AXIS_LEFT_FRONT_CLIP.stl	Y_AXIS_LEFT_FRONT_CLIP.obj
P19	Left fixed belt tensioner	1		Y_AXIS_LEFT_BACK_CLIP.stl	Y_AXIS_LEFT_BACK_CLIP.obj
P20	Left side plate	1		LEFT_PLATE.stl	LEFT_PLATE.obj
P21	Left side plate lower back clip	1		LEFT_PLATE_BACK_CLIP.stl	LEFT_PLATE_BACK_CLIP.obj
P22	Left side plate lower front clip	1		LEFT_PLATE_LOWER_FRONT_CLIP.stl	LEFT_PLATE_LOWER_FRONT_CLIP.obj
P23	Left side plate upper front clip	1		LEFT_PLATE_UPPER_FRONT_CLIP.stl	LEFT_PLATE_UPPER_FRONT_CLIP.obj
P24	Milling router bracket	1		ROUTER_BRACKET.stl	ROUTER_BRACKET.obj
P25	Rail support	3		RAILS_SUPPORT.stl	RAILS_SUPPORT.obj
P26	Right belt tension slider	1		Y_AXIS_RIGHT_BELT_TENSIONER.stl	Y_AXIS_RIGHT_BELT_TENSIONER.obj
P27	Right belt tensioner	2		Y_AXIS_RIGHT_FRONT_CLIP.stl	Y_AXIS_RIGHT_FRONT_CLIP.obj
P28	Right fixed belt tensioner	2		Y_AXIS_RIGHT_BACK_CLIP.stl	Y_AXIS_RIGHT_BACK_CLIP.obj
P29	Right side plate	1		RIGHT_PLATE.stl	RIGHT_PLATE.obj
P30	Right side plate lower back clip	1		RIGHT_PLATE_BACK_CLIP.stl	RIGHT_PLATE_BACK_CLIP.obj
P31	Right side plate lower front clip	1		RIGHT_PLATE_LOWER_FRONT_CLIP.stl	RIGHT_PLATE_LOWER_FRONT_CLIP.obj
P32	Right side plate upper front clip	1		RIGHT_PLATE_UPPER_FRONT_CLIP.stl	RIGHT_PLATE_UPPER_FRONT_CLIP.obj
P33	USB lock	1		USB_LOCK.stl	USB_LOCK.obj
P34	Vaccum funnel	1		VACUUM_FUNNEL.stl	VACUUM_FUNNEL.obj
P35	Vaccum hose ring	1		VACUUM_HOSE_RING.stl	VACUUM_HOSE_RING.obj
P36	Vertical carriage slider	1		VERTICAL_SLIDER.stl	VERTICAL_SLIDER.obj
P37	Wasteboard bracket	7		BRACKET.stl	BRACKET.obj
P38	X-axis cable chain mount	1		CABLE_CHAIN_MOUNT.stl	CABLE_CHAIN_MOUNT.obj
P39	Z-axis end-stop trigger	1		Z_END_STOP_TRIGGER.stl	Z_END_STOP_TRIGGER.obj
P40	Z-axis stepper motor mount	1		Z_MOTOR_MOUNT.stl	Z_MOTOR_MOUNT.obj

Screws

Item No.	Size	Length	Amount	Image
S01	3.5mm	20mm	14
S02	M3	12mm	20
S03	M3	16mm	96
S04	M3	20mm	32
S05	M3	25mm	36
S06	M3	40mm	12
S07	M3	5mm	8
S08	M3	8mm	4
S09	M4	18mm	2
S10	M4	25mm	19
S11	M4	40mm	8
S12	M5	20mm	26
S13	M5	40mm	6
S14	M5	60mm	2
S17	M5	80mm	1
S15	M8	60mm	9
S16	M8	80mm	2

Nuts

Item No.	Size	Amount	Image
N01	M4	11
N02	M5	15
N03	M8	35

Washers

Item No.	Outer diameter	Inner diameter	Thickness	Amount	Image
W01	10mm	5mm	1mm	13
W02	15mm	5mm	1mm	14
W03	15mm	8.5mm	1.5mm	24
W04	20mm	10mm	2mm	27
W05	8mm	4mm	0.5mm	12
W06	8mm	4mm	1mm	4
W07	9mm	4.5mm	1mm	2

Electronics

Item No.	Type	Amount	Image
E01	12V Fan	2
E02	12V power supply (UHP-200-12)	1
E03	12V wires (black and red)	~10m
E04	220V power plug	1
E05	220V power socket	1
E06	220V/10A cable (red, blue and green/yellow)	~2m
E07	3-way Wago splicing connector (221-413)	3
E08	AWG22 wire (red, blue, green and black)	~10m per color
E09	Arduino Uno	1
E10	Arduino Uno CNC Shield	1
E11	Bipolar stepper motor (Nema 17, no gear, 5mm shaft diameter)	1
E12	C-GRID III contact housing, 2.54mm (1X2)	5	Missing
E13	C-GRID III contact housing, 2.54mm (1X4)	4
E14	C14 terminal	1
E15	Crimp sleeve C-GRID III AWG 22/24	26
E16	DRV8825 stepper drivers	4
E17	Emergency stop switch (KJD17B)	1
E18	Geared (19:1) bipolar stepper motor (Nema 17, 8mm shaft diameter)	3
E19	Jumpers	6
E20	Makita RT0700C (milling router)	1
E21	Microswitch	5
E22	Red LED	1
E23	Ring terminal (M3)	4
E24	Ring terminal (M4)	3
E25	Spade connector (2.8mm)	10
E26	Spade connector (4.8mm)	6
E27	Spade connector (6.3mm)	4
E28	USB A (male) to USB B (male)	1
E29	USB A PCB (female)	1
E30	C13 cable	1

Threaded rods

Item No.	Size	Length	Amount	Image
T01	M5	140mm	2
T02	M8	120mm	8
T03	M8	717mm	4

Other

	Type	Amount	Image
O01	698zz bearing	18
O02	Acme threaded rod (300 mm long, 8x8mm)	1
O03	Acme threaded rod nut (8x8mm)	1
O04	Aluminium profiles (677x30x30 mm)	4
O05	Aluminium profiles (803x30x30 mm)	3
O06	Aluminium profiles (80x30x30 mm)	8
O07	Aluminium profiles (900x30x30 mm)	4
O08	Braided cable sleeve (20mm)	5m
O09	Cable chain (1m long, 30x15mm inner dimensions)	2
O10	Cable clip	1
O11	Cable ties	~30
O12	Flat end mill	NA
O13	Flexible conduit	2m
O14	GT2 belt (6mm belt width, 300mm long)	1
O15	GT2 pulley (16 teeth, 5mm bore, 6mm belt width)	1
O16	GT2 pulley (60 teeth, 8mm bore, 6mm belt width)	1
O17	HTD5M belt (15mm width)	4m
O18	HTD5M pulley (12 teeth, 8mm bore, 15mm belt width)	3
O19	KFL08 rod bearing (8mm)	2
O20	MGN12H linear rail (200mm)	2
O21	MGN12H linear rail (600mm)	4
O22	MGN12H linear rail block	12
O23	Masking tape	1
O24	Shrinking tubes	NA
O25	Cable grommet	1
O26	Plywood (approx. 12x1500x1500mm)	1
O27	Brush	0.5m