7 Star 43 Fork 55

深圳市云创智城科技有限公司 / YunCharging

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
EPL-1.0

YunCharging

介绍

YunCharging智慧充电系统以微信、公众号为C端主要入口,为充电用户提供查桩找桩、设备信息查询、在线支付、充电状态查询、账户信息等服务,具备在线充值、支付、实时到账功能,给充电用户带来更加安全、便捷、贴心的充电体验。

行业交流群

智慧城市项目交流QQ群

输入图片说明

群已满,请加二群:955562455

项目合作交流微信

输入图片说明

在线文档

充电项目系统文档在线地址

停车项目系统文档在线地址

公司其它开源

智慧充电开源仓库地址

充电桩硬件产品

​ 电单车充电桩硬件产品是保障电单车安全快捷充电的重要设施,适用于单位、住宅小区、商场的自行车停车棚,为电动自行车提供充电电源。采用单片微机技术,操作简捷、性能稳定。充电采用智能语音,按照提示音可自行操作充电。支持扫码、刷卡支付功能, 十路输出每路独立保险丝保护,带有较大电流检测,当充电电流大于设定的较大电流时,切断输出。使用时,先插上电源充电器,扫码或者刷卡支付充电金额后,设备会自动检测充电器是否连接正常,再启动充电。

技术特点

  • 输入电压:220VAC 50HZ ,待机功耗低于5W;

  • 保险丝:250V F10A 5*20(有保险丝座,保险丝可更换)每路独立的保险丝座,独立保护;

  • 带语音播报功能;

  • 设备需安装物联卡联网后才能使用,支持远程固件升级(OTA);

  • 收费模式:时间计费,功率段计费,电量计费;

  • 单端口可以根据设定的功率来做出相应的开启和停止,服务器可以设置参数;

  • 单端口开启和停止,独立保护和电池充满提示;

  • 单端口充满自停(默认5W,最大255W),过载保护(默认600W,最大600W),整机总功率过载保护(默认6000W,最大6000W),服务器可以设置;

使用环境

  • 使用过程中要防止油、盐、水等异物进入机箱,以免引起内部电路短路烧坏器件;
  • 应用场合无无腐蚀性及无强电磁辐射,需要定期查看保养除尘和查看工作状态以及周边环境,及早排查潜在不安全因素;
  • 工作环境: 工作温度范围:-10℃~+40℃;储存温度范围:-20℃~+70℃; 相对湿度范围:40~98%;

设备接线示意图

  • 接线顺序,按下图接线完成后,最后接入220V 50HZ,空气漏电开关打开;

image-20220827161418155

  • 接入电源后,主板上LED灯闪烁,语音提示“设备启动中”,10路LED灯同时在闪烁,开始连接网络,然后系统提示“设备启动完毕”进入待机, 10路LED灯跑马灯闪烁,若环境信号弱可能找不到网络,无法完成启动,需要在信号强的环境安装;

充电桩型号

序号 型号 硬件配置
1 10路LED单扫码充电桩 触摸LED显示板(不含弹簧)+刷卡+扫码+10路10A继电器主控板+4G天线+喇叭+空气开关
2 10路LED触摸刷卡扫码充电桩 触摸LED显示板+刷卡+扫码+10路10A继电器主控板+4G天线+喇叭+空气开关
3 10路轻触按键刷卡扫码充电桩 6位数码管轻触按键板+刷卡板+10路10A继电器主控板+通讯板+4G天线+喇叭+空气开关
4 8+2路大功率扫码刷卡充电桩 6位数码管轻触按键板+刷卡板+(8路10A继电器+2路30A继电器主控板)+通讯板+4G天线+喇叭+空气开关
5 20路LED显示扫码刷卡充电桩 LED轻触按键+刷卡板+通讯板+20路10A继电器主控板+4G天线+喇叭+空气开关

型号介绍

10路LED单扫码充电桩

一、付款方式:扫码支付

二、产品特点:

1、带语音播报功能

2、充满自停

3、过载保护、漏电保护

4、机箱温度监控预警

5、4G联网通讯,可远程OTA升级

6、收费方式多种:计时、功率段、电量收费

7、独立后台管理

8、远程主动关闭充电订单

9、待机功耗低:低于5W

10路LED触摸刷卡扫码充电桩

img

img

一、付款方式:扫码支付 / 刷卡支付

二、产品特点:

1、带语音播报功能

2、充满自停

3、过载保护、漏电保护

4、机箱温度监控预警

5、4G联网通讯,可远程OTA升级

6、收费方式多种:计时、功率段、电量收费

7、独立后台管理

8、远程主动关闭充电订单

9、待机功耗低:低于5W

10路轻触按键刷卡扫码充电桩

一、付款方式:扫码支付 / 刷卡支付

二、产品特点:

1、带语音播报功能

2、充满自停

3、过载保护、漏电保护

4、机箱温度监控预警

5、4G联网通讯,可远程OTA升级

6、收费方式多种:计时、功率段、电量收费

7、独立后台管理平台

8、远程主动关闭充电订单

9、待机功耗低:低于5W

10、余额显示,订单充电时间显示

8+2路大功率扫码刷卡充电桩

一、付款方式:扫码支付 / 刷卡支付

二、产品特点:

1、带语音播报功能

2、充满自停

3、过载保护、漏电保护

4、机箱温度监控预警

5、4G联网通讯,可远程OTA升级

6、收费方式多种:计时、功率段、电量收费

7、独立后台管理平台

8、远程主动关闭充电订单

9、待机功耗低:低于5W

10、余额显示,订单充电时间显示

11、第5、6路支持单路3500W功率充电

20路LED显示扫码刷卡充电桩

一、付款方式:扫码支付 / 刷卡支付

二、产品特点:

1、带语音播报功能

2、充满自停

3、过载保护、漏电保护

4、机箱温度监控预警

5、4G联网通讯,可远程OTA升级

6、收费方式多种:计时、功率段、电量收费

7、独立后台管理平台

8、远程主动关闭充电订单

9、待机功耗低:低于5W

充电管理运营平台

主要包括:后台运营系统、小程序两个端

后台运营系统

首页

  • 运营数据统计概况,用户的注册数量,设备的总数,交易金额,总订单,支付方式,用户分布,月收入统计柱状图表

image-20220827171654816

用户管理

微信用户列表

  • 所有微信小程序注册用户列表信息的展示,运营人员也可以在后台进行充值,用户账号禁用启用操作。

image-20220827163411987

支付宝用户列表

  • 所有支付宝小程序注册用户列表信息的展示,运营人员也可以在后台进行充值,用户账号禁用启用操作。

image-20220827163832112

经营统计

经营报表

  • 经营数据统计看板,可以直观展示昨日的交易数据情况,交易金额,扫码充值金额,IC卡代充金额,套餐预充金额;总用电量,订单总数,可提现的金额,在线设备的总数;
  • 代理商、设备不同维度展示订单总数,刷卡、扫码收入总数;

image-20220827163948641

设备管理

未生产设备

  • 未生产的设备管理

image-20220827164016084

设备控制
  • 设备远程控制,配合现场施工接入调试

image-20220827164829255

设置收费方案
  • 配置收费的方案,可以根据不同收费类型进行收费,包括,按时间,按电量,免费,按功率,并选择提前配置好的收费方案为每个设备可以设置不同收费方案;

image-20220827164159235

小程序二维码生成打印
  • 给每个充电桩设备的每个充电口生成二维码,需要打印出来贴到对应的该设备号不同充电口上,用户通过扫码进行充电;

image-20220827164243739

设备详情
  • 可以查房每个充电桩设备的详情,详细的实时总功率,功率下限,功率上限,总功率上限,警告温度,低温,高温,设备机箱温度,设备等待时间,设备心跳时间,设备信号;

image-20220827164330598

已入库设备

  • 对已生产完的设备可以流转到已入库列表集中进行管理

image-20220827172853564

未安装设备

  • 未安装设备的管理image-20220827173102605

已安装设备

  • 已经安装的设备,可以并通过设备的收费规则类型:计时、电量、免费分类管理,可以批量进行分配到不同的代理商网点下,批量进行收费规则的配置,同步设备最新的状态;
  • 通过操作可以对设备进行远程控制,分配,禁用,删除,收费方案配置,详细查看,小程序二维码生成打印;

image-20220827164741365

远程控制
  • 远程控制:对设备远程进行调试,可辅助现场进行运维管理;
  • 远程启动充电口,继续充电,启动全部端,停止端口,查询端口,刷新端的状态,重启整个充电设备;

image-20220827173357633

升级软件列表

  • 设备远程OTA升级,远程维护更新最新程序;

image-20220827164937031

设备类型

  • 设备类型的管理维护

image-20220827164955160

订单管理

扫码订单列表

  • 通过扫充电桩不充电口进行充电的创单进行管理,并可以查询充电的功率图详情;订单的结束,删除;

image-20220827165041876

刷卡订单列表

  • 通过刷IC卡进行充电的订单列表,下图是充电的详细的功率图,及订单的详细信息;

image-20220827165132217

免费订单列表

  • 免费订单的列表信息管理

image-20220827165152482

指令管理

指令列表

  • 设备远程操作,运程控制相关下行指令管理;

image-20220827165209432

广告管理

广告列表

  • 通过后台广告投放,可以对应展示到小程序的广告位上,进行活动的推广及运营使用;

image-20220827165230286

充电站管理

充电站列表

  • 充电站的管理,创建电创建,修改,删除;

image-20220827165345159

收费方案

计时收费方案

  • 按时计费配置收费方案

image-20220827165439633

电量收费方案

  • 按电量收费方案的配置

image-20220827165526969

功率收费方案

  • 按功率收费方案的配置

image-20220827165554355

充值套餐方案

  • 充值赠送活动配置

image-20220827165618071

充值方案管理

余额充值方案

  • 余额充电方案设置

image-20220827165639549

IC卡充值方案

  • IC卡充值方案

image-20220827165705475

充电卡管理

充电卡列表

  • 充电卡管理,可对每个充电卡进行后台充值进行充值,添加充电卡,充电卡的挂失;

image-20220827165746366

财务管理

提现管理

image-20220827165837483

充值记录

image-20220827165932127

商品管理

商品列表

  • 通过商品列表可以发布商品信息,用户在小程序可以购买商品;

image-20220827170008863

商品上架

  • 商品上架

image-20220827170050538

商品订单

  • 商品订单信息,用户下下单的商品信息;对商品发货后填写物流单号进行管理;

image-20220827170120565

image-20220827175406829

故障管理

故障列表

  • 用户反馈的设备异常故障信息,后台运营客服可以进行问题处理;

image-20220827170212406

运营商管理

运营商列表

  • 支持二级代理商管理,对代理商账号进行开建,分成的利润,账号冻结,初始密码等维护;

image-20220827170308856

  • 下级代理商管理image-20220827170459186

权限管理

角色管理

  • 设备角色管理,不同权限用户可以创建不同角色。根据不同角色可以实现不同级别的数据权限控制;

image-20220827170527921

菜单管理

  • 后台所有菜单配置,菜单功能按钮的管理,权限分配;

image-20220827170612553

配置管理

系统配置

  • 针对用户单次充值允许的体现阈值进行全局控制;

image-20220827170641080

用户小程序

  • 微信小程序
  • 支付宝小程序

首页

  • 充电地图,充电桩分布,搜索,附近充电桩查询,扫码充电;

image-20220827180142647

附近充电桩

image-20220827180211267

我的

  • 我的:栏里包含,充电记录查看,钱包充值管理,我要充值进行本人充值及帮他人代充值;用户使用帮助手册,使用故障报修到平台;
  • 中心商城:查看商品列表,用户可以进行商品在线购买,购买后订单记录,收费地址管理;
  • 代理商:提供给代理商或项目业主直接小程序上登陆后台,可以在项目安装初期对设备进行调试管理,以及运营数据查看;

image-20220827180327515

我要充值

image-20220827180358042

代人充值

image-20220827181115645

商城列表

image-20220827180428993

商品信息

image-20220827180449794

商品详情

image-20220827180526855

收费地址添加

image-20220827180636829

订单列表

image-20220827180700542

代理商登陆

  • 可以登陆代理商后台,对设备进行施工维护,运营数据查看。

image-20220827180717807

代理后台

image-20220828164005380

名下代理商

image-20220828183024345

用户充值方案设置

image-20220828183228498

故障反馈

image-20220828183311268

IC充电卡充值

image-20220828183406640

安装设备

image-20220828183453597

入库扫码调试

image-20220828183528685

调试入库

image-20220828185115614

设备收费方案

image-20220828183651472

使用帮助

image-20220827180809168

故障报修

image-20220827180756868

Eclipse Public License - v 1.0 THE ACCOMPANYING PROGRAM IS PROVIDED UNDER THE TERMS OF THIS ECLIPSE PUBLIC LICENSE ("AGREEMENT"). ANY USE, REPRODUCTION OR DISTRIBUTION OF THE PROGRAM CONSTITUTES RECIPIENT'S ACCEPTANCE OF THIS AGREEMENT. 1. DEFINITIONS "Contribution" means: a) in the case of the initial Contributor, the initial code and documentation distributed under this Agreement, and b) in the case of each subsequent Contributor: i) changes to the Program, and ii) additions to the Program; where such changes and/or additions to the Program originate from and are distributed by that particular Contributor. A Contribution 'originates' from a Contributor if it was added to the Program by such Contributor itself or anyone acting on such Contributor's behalf. Contributions do not include additions to the Program which: (i) are separate modules of software distributed in conjunction with the Program under their own license agreement, and (ii) are not derivative works of the Program. "Contributor" means any person or entity that distributes the Program. "Licensed Patents" mean patent claims licensable by a Contributor which are necessarily infringed by the use or sale of its Contribution alone or when combined with the Program. "Program" means the Contributions distributed in accordance with this Agreement. "Recipient" means anyone who receives the Program under this Agreement, including all Contributors. 2. GRANT OF RIGHTS a) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free copyright license to reproduce, prepare derivative works of, publicly display, publicly perform, distribute and sublicense the Contribution of such Contributor, if any, and such derivative works, in source code and object code form. b) Subject to the terms of this Agreement, each Contributor hereby grants Recipient a non-exclusive, worldwide, royalty-free patent license under Licensed Patents to make, use, sell, offer to sell, import and otherwise transfer the Contribution of such Contributor, if any, in source code and object code form. This patent license shall apply to the combination of the Contribution and the Program if, at the time the Contribution is added by the Contributor, such addition of the Contribution causes such combination to be covered by the Licensed Patents. The patent license shall not apply to any other combinations which include the Contribution. No hardware per se is licensed hereunder. c) Recipient understands that although each Contributor grants the licenses to its Contributions set forth herein, no assurances are provided by any Contributor that the Program does not infringe the patent or other intellectual property rights of any other entity. Each Contributor disclaims any liability to Recipient for claims brought by any other entity based on infringement of intellectual property rights or otherwise. As a condition to exercising the rights and licenses granted hereunder, each Recipient hereby assumes sole responsibility to secure any other intellectual property rights needed, if any. For example, if a third party patent license is required to allow Recipient to distribute the Program, it is Recipient's responsibility to acquire that license before distributing the Program. d) Each Contributor represents that to its knowledge it has sufficient copyright rights in its Contribution, if any, to grant the copyright license set forth in this Agreement. 3. REQUIREMENTS A Contributor may choose to distribute the Program in object code form under its own license agreement, provided that: a) it complies with the terms and conditions of this Agreement; and b) its license agreement: i) effectively disclaims on behalf of all Contributors all warranties and conditions, express and implied, including warranties or conditions of title and non-infringement, and implied warranties or conditions of merchantability and fitness for a particular purpose; ii) effectively excludes on behalf of all Contributors all liability for damages, including direct, indirect, special, incidental and consequential damages, such as lost profits; iii) states that any provisions which differ from this Agreement are offered by that Contributor alone and not by any other party; and iv) states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange. When the Program is made available in source code form: a) it must be made available under this Agreement; and b) a copy of this Agreement must be included with each copy of the Program. Contributors may not remove or alter any copyright notices contained within the Program. Each Contributor must identify itself as the originator of its Contribution, if any, in a manner that reasonably allows subsequent Recipients to identify the originator of the Contribution. 4. COMMERCIAL DISTRIBUTION Commercial distributors of software may accept certain responsibilities with respect to end users, business partners and the like. While this license is intended to facilitate the commercial use of the Program, the Contributor who includes the Program in a commercial product offering should do so in a manner which does not create potential liability for other Contributors. Therefore, if a Contributor includes the Program in a commercial product offering, such Contributor ("Commercial Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages and costs (collectively "Losses") arising from claims, lawsuits and other legal actions brought by a third party against the Indemnified Contributor to the extent caused by the acts or omissions of such Commercial Contributor in connection with its distribution of the Program in a commercial product offering. The obligations in this section do not apply to any claims or Losses relating to any actual or alleged intellectual property infringement. In order to qualify, an Indemnified Contributor must: a) promptly notify the Commercial Contributor in writing of such claim, and b) allow the Commercial Contributor to control, and cooperate with the Commercial Contributor in, the defense and any related settlement negotiations. The Indemnified Contributor may participate in any such claim at its own expense. For example, a Contributor might include the Program in a commercial product offering, Product X. That Contributor is then a Commercial Contributor. If that Commercial Contributor then makes performance claims, or offers warranties related to Product X, those performance claims and warranties are such Commercial Contributor's responsibility alone. Under this section, the Commercial Contributor would have to defend claims against the other Contributors related to those performance claims and warranties, and if a court requires any other Contributor to pay any damages as a result, the Commercial Contributor must pay those damages. 5. NO WARRANTY EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is solely responsible for determining the appropriateness of using and distributing the Program and assumes all risks associated with its exercise of rights under this Agreement , including but not limited to the risks and costs of program errors, compliance with applicable laws, damage to or loss of data, programs or equipment, and unavailability or interruption of operations. 6. DISCLAIMER OF LIABILITY EXCEPT AS EXPRESSLY SET FORTH IN THIS AGREEMENT, NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 7. GENERAL If any provision of this Agreement is invalid or unenforceable under applicable law, it shall not affect the validity or enforceability of the remainder of the terms of this Agreement, and without further action by the parties hereto, such provision shall be reformed to the minimum extent necessary to make such provision valid and enforceable. If Recipient institutes patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Program itself (excluding combinations of the Program with other software or hardware) infringes such Recipient's patent(s), then such Recipient's rights granted under Section 2(b) shall terminate as of the date such litigation is filed. All Recipient's rights under this Agreement shall terminate if it fails to comply with any of the material terms or conditions of this Agreement and does not cure such failure in a reasonable period of time after becoming aware of such noncompliance. If all Recipient's rights under this Agreement terminate, Recipient agrees to cease use and distribution of the Program as soon as reasonably practicable. However, Recipient's obligations under this Agreement and any licenses granted by Recipient relating to the Program shall continue and survive. Everyone is permitted to copy and distribute copies of this Agreement, but in order to avoid inconsistency the Agreement is copyrighted and may only be modified in the following manner. The Agreement Steward reserves the right to publish new versions (including revisions) of this Agreement from time to time. No one other than the Agreement Steward has the right to modify this Agreement. The Eclipse Foundation is the initial Agreement Steward. The Eclipse Foundation may assign the responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number. The Program (including Contributions) may always be distributed subject to the version of the Agreement under which it was received. In addition, after a new version of the Agreement is published, Contributor may elect to distribute the Program (including its Contributions) under the new version. Except as expressly stated in Sections 2(a) and 2(b) above, Recipient receives no rights or licenses to the intellectual property of any Contributor under this Agreement, whether expressly, by implication, estoppel or otherwise. All rights in the Program not expressly granted under this Agreement are reserved. This Agreement is governed by the laws of the State of New York and the intellectual property laws of the United States of America. No party to this Agreement will bring a legal action under this Agreement more than one year after the cause of action arose. Each party waives its rights to a jury trial in any resulting litigation.

简介

YunCharging智慧充电系统以微信、公众号为C端主要入口,为充电用户提供查桩找桩、设备信息查询、在线支付、充电状态查询、账户信息等服务,具备在线充值、支付、实时到账功能,给充电用户带来更加安全、便捷、贴心的充电体验。 展开 收起
Java
EPL-1.0
取消

发行版

暂无发行版

贡献者

全部

近期动态

加载更多
不能加载更多了
Java
1
https://gitee.com/yuncitys/YunCharging.git
git@gitee.com:yuncitys/YunCharging.git
yuncitys
YunCharging
YunCharging
master

搜索帮助